Numerous applications, and in particular for the making of taps and valves (plumbing-heating industry), use many components that require the boring out of parts.
Brass hollow rods offers significant economic advantages, by way of removing the need for drilling operations, and very often the boring out of the parts.
KME offers a wide variety of shapes (as seen in the example on this page) and sizes: The diagram below shows the dimensional range that is available (I.D. / O.D. in mm).
|Alloys EN 12168 designation||a) Physical condition; b) Tolerances on dim.; c) Lengths of rods; d) Packing type|
a) As manufactured and stress relieved;
b) according to EN 12168 : external tab.7 wall thickness tab.8;
c) Standard : 3000 mm. On request : 4000 mm;
d) Bundles 1000 kg with 4 iron strapson corrugated paper or plastic wrapped.