Select language:

KUTERLEX PLUS, PLASTIC COATED COPPER TUBE

Kuterlex Plus copper tube is sheathed in a continuous cover that has air channels on the internal surface

Kuterlex Plus is primarily designed to give the tube enhanced protection from external attack. In addition, the cover creates a thermal barrier which reduces heat loss from buried tube and condensation on exposed cold pipework. It has an insulation factor of 0.29 W/m/K.

STANDARD FEATURES

  • Cu-DHP grade copper
  • Manufactured in accordance with BS EN 13349 (specification for covered copper tube)
  • Copper tube to BS EN 1057
  • BSi Kitemark licensed (copper tube)
  • Straight lengths available in 5.8m lengths for container loads to export markets

PRODUCT RANGE
  Straight tube Coil
Specification BS EN 13349 / BS EN 1057 15-28mm Half-hard (R250), 35-54mm Hard (R290) BS EN 13349 / BS EN 1057 Annealed (R220)
SIZE  (mm)
(OD x Wall)
From 15 x 0.7 to 54 x 1.2 From 8 x 0.6 to 22 x 1.2
Lengths 5.8m, 6m (according to size) 25m
Tubes per bundle or Coils per pallet From 30 to 100 (according to size) From 20 to 40 (according to size)
For full detailed information on the product range of Kuterlex Plus tubes, please visit the Yorkshire Copper Tube website.

TYPICAL APPLICATIONS
  • Hot water systems
  • Underground pipework, including contaminated ground
  • Pipework installed in concrete
  • Humid atmospheres

BENEFITS

  • Reduces installation time
  • Protects the copper tube against aggressive materials
  • Protects the copper tube against accidental damage and abrasion
  • Plastic covering withstands water service temperatures up to 95°C
  • Covering remains flexible down to -60°C
  • Reduces condensation on exposed pipework
  • Reduces surface temperature of the tube, thereby minimising the risk of burns or scalding
  • Reduces noise level in exposed pipework
  • Removes the need to paint exposed pipework
GUARANTEE (United Kingdom)
  • 25 year guarantee against product failure directly attributable to a manufacturing defect
DESIGN, INSTALLATION AND USE

All systems should be designed, installed and used in accordance with appropriate specifications or codes of practice (e.g. BS 6700) and/or Yorkshire Copper Tube technical recommendations.

 

 
 
Copyright ® 1999-2012 KME Italy S.p.A. - All rights reserved
Legal notices | Privacy policy | KME News RSS-Feed | Contact us | Photo credits
KME | Via dei Barucci 2, 50127 Firenze | Tel. +39 055-44111 | Fax +39 055-4411 240 | P.iva IT04528110481 | E-Mail: info@kme.com