Equal Tees

Type and Construction

Tee pieces are in accordance with EEMUA–234, Section 1. Seamless tee pieces are typically available up to 8 in./219 mm; bigger dimensions are welded.

Dimensions

Dimensions are based on EEMUA -234, Section 1, Figures 1.1-1.2, Tables 1.1-1.2 and 1.6. Tee pieces with other dimensions are available on request.

Tolerances

See Appendix C

Weld Preparation

For wall thickness less than 3 mm, the tees are supplied with plain weld ends. Larger thicknesses are supplied with the weld bevel of 37 ½°±2 ½°.

DIMENSIONS

Nominal Specified Specified Pipe Wall Thickness t    Approx. Weight (kg)
Size Size (OD)   mm     mm
in mm 16 bar 20 bar E 16 bar 20 bar
1 30  Use
20 bar
2.5 38  Use
20 bar
0.30
38 2.5 48 0.50
44.5 2.5 57 0.75
2 57 2.5 64 1.00
76.1 2.5 76 1.60
3 88.9 2.5 86 2.00
4 108 3.0 105 3.25
6 159 3.0 3.5 143 6.00 7.20
8 219.1 4.0 4.5 178 11.25 12.70
10 267 4.5 5.5 216 22.50 27.50
12 323.9 5.5 7.0 254 39.50 50.30
14 368 6.5 8.0 279 62.00 76.00
16 419 7.0 9.0 305 88.00 119.00
18 457.2 8.0 9.5 343 128.00 152.00
20 508 8.5 11.0 381 165.00 214.00
24 610 10.5 13.0 432 266.00 330.00
28 711 12.0 15.0 521 388.00 458.00
32 813 13.5 17.0 597 508.00 606.00
36 914 15.4 19.0 673 650.00 794.00